menu

As of TSVNCC-version 20150220, you can integrate the Siemens header in TSVNCC and change the variables of the TSVNCC image.

To have the Siemens header displayed in the TSVNCC, the TSVNCC entry in the systemconfiguration.ini file must be changed. After "dialog:=TSVNCCdialog", you must add "   , panel:=SlHdStdHeaderPanel". Example:

AREA0501= name:=ToolScope, dialog:=TSVNCCdialog, panel:=SlHdStdHeaderPanel

The header will now cover parts of the TSVNCC area. It is therefore necessary to adjust the display size of the TSVNCC.

 

In TSVNCC.ini, change the values DEFINED_X, DEFINED_Y, DEFINED_WIDTH and DEFINED_HEIGHT so that the ToolScope and the header do not overlap. The values are dependent on the resolution. If the machine manufacturer has not modified the display layout, the following values apply:

 

Resolution

DEFINED_X

DEFINED_Y

DEFINED_WIDTH

DEFINED_HEIGHT

640 x 480

0

32

640

448

800 x 600

0

40

800

560

1024 x 768

0

51

1024

717

1280 x 1024

0

53

1280

971

 

Example: You wish to adjust the TSVNCC to the Siemens header. The system has a resolution of 800 x 600. In this case, the four values in TSVNCC.ini will read as follows:

DEFINED_X=0
DEFINED_Y=40
DEFINED_WIDTH=800
DEFINED_HEIGHT=560

In the ToolScope, under "Service" / "Settings" / "Display" / "Resolution", activate the option "Apply from the control panel". This ensures that TSVNCC reports your planned resolution to the ToolScope and the ToolScope automatically matches it.

The control system and the ToolScope must then be restarted.

Please note that the softkey bars on the sides of the ToolScope are not to scale with the softkey bars on the sides of the control system.

The following figures shows the TSVNCC with Siemens header.