This product is a Compile Cycle for Siemens controlled machine tools. It is used to let the Siemens NC deliver axes data (torques, positions, speeds, currents, control deviations, ...) with a high frequency to the ToolScope.

Short description of the delivered product (Quotation text)

  • Needed for machine tools with Siemens 840D controllers to be able to get the drive signals (torque etc.) from the machine with a high frequency.


Additional information to the delivered product

  • For Siemens controls, the ToolScope can retrieve axes data either from this compile cycle "Tool&Process Monitoring" (TPM), or from the compile cycle "Axes Data Stream" (ADAS) or via synchronous action from the NC.

  • Link to technical part of knowledge base - including a comparison - regarding the compile cycles (V11)

  • This order number is for installations at 840D pl controls. See this article (link) for 840D sl controls.

  • The Siemens order number for this product is 6FC5251-0AF44-0AA0. You can order it directly at Siemens, if you want. KOMET regularly

    • buys it and invoices it, if an end customer is supplied.

    • lets the OEM buy it, if the OEM is supplied.

      (Because an OEM regularly has slightly higher discounts as KOMET)


  • None