menu

This product is a digital output which can be coupled to the ToolScope via EtherCAT. You need a bus coupler E65 19010 for that.

Short description of the delivered product (Quotation text)

  • None

Additional information to the delivered product

  • ToolScope of revision 3 can be connected with analog or digital outputs or inputs as they are needed.


     
  • The connection is done by an Ethernet cable via the EtherCAT protocol.
     
  • The ToolScope is connected to a EtherCAT bus coupler. It communicates with the coupler. The modular input and output units are added to the coupler.
     
  • BRINKHAUS delivers as standard unit
    • A module with 4 analog inputs (E65 19020)
    • A module with 4 analog outputs (E65 19030)
    • A module with 8 digital inputs (E65 19040)
    • A module with 8 digital outputs (E65 19050 - the product described at this page)
  • To supply the above mentioned modules with power and to connect them via EtherCAT to the ToolScope, one needs a bus coupler. This is  E65 19010.

 

  Task in the EtherCAT system Deliver digital output values
  Connection 1-wire
  Output voltage 24 V DC (-15 %/+20 %)
  Load types resistive. inductive, lights
  Output current 0,5 A (short-circuit-protected) per channel
  Short-circuit current <2A typ.
  Polarity protection yes
  Switch-Off energy <150 mJ / channel
  Switching times TON: 60 µs typ., TOFF: 300 µs typ.
  Current consumption E-Bus 110 mA typ.
  Current consumption power contacts 15 mA + load
  Width in process image 1 byte
  Potential isolation 500V (E-Bus / network / outputs)
  Weight ca. 55 g
  Certificates CE, EL, Ex
  Mechanic shock resistance EN 60068-2-6/EN 60068-2-27
  EMC resistance EN 61000-6-2/EN 61000-6-4
  Protection IP20
  Ambient temperature -25…+60 °C/-40…+85 °C (95% humidity, non condensating)
     

Attachments